网站标志
购物车
购物车  有 0件商品  总价 ¥0.00
商品搜索

 

点评详情
发布于:2019-8-26 12:22:03  访问:29 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
Automobile Radio Exchange For Dummies With Installation Directions From Experts
Car Stereo Wiring Options: Assess the Plugs. The easiest way to install a new vehicle radio would be to use a replacement head unit that is compatible with the existing wiring harness plug. This limits the amount of head units you can use, however. In the vehicle pictured above, the connector and plug clearly do not match. There are a few unique techniques to deal with this circumstance. The simplest approach is to buy an adapter exploit. If you discover a harness that`s designed especially for your head unit and vehicle, you can simply plug it in and move. You might also have the ability to find a harness which you could wire into the pigtail that came with your new head unit. The other choice is to cut off the tap that was connected to a factory radio and wire the aftermarket pigtail directly into it. If you decide to go that path, you can use either crimp connectors or solder.
Before you begin, it`s important to ensure that you buy the perfect new head unit and have the necessary tools on hand. The most critical factor is that you will need to purchase the perfect size replacement car stereo. This is the reason it`s so important to understand the difference between single DIN, dual DIN, and DIN-and-a-half. If you make sure your new automobile radio gets the perfect attributes, and it will really fit in your vehicle, then you`ll prevent a great deal of headaches later on. Concerning the tools you will have to complete this type of project, here are the most crucial ones:Flat blade and Phillips head screwdrivers.Torx drivers or bits. Wiring port.
Remove Any Extra Brackets. Factory automobile radios are often held in place with elaborate mounts, and you might or might not have to reuse the bracket once you install the radio. In the vehicle pictured above, the factory stereo is related to a massive bracket that contains a storage pocket. The mount and the distance in the dash are capable of carrying a far bigger head unit. Since we are replacing one DIN head unit using a brand new single-DIN head unit, we will reuse the bracket and the storage pocket. If we had been installing a bigger head unit, we would get rid of the pocket and possibly not use the bracket in any way. If your vehicle has a mount such as this, you`ll need to determine whether your new head unit needs it.
What this signifies is that the first step in replacing a car radio would be to expose each the screws, screws, bolts, or other fasteners that hold the head unit set up. Typically, you`ll need to remove some form of trimming piece, or trimming pieces, to access the fasteners. These trim pieces occasionally pop straight out, Lautsprecher einbauen but a lot have hidden screws behind the ashtray, switches, or sticks. When you`ve removed all the screws, you can insert a flat blade screwdriver or prying tool and make an effort to pop the trim piece off.
Never force a trim bit, faceplate, or other plastic dash components. Should you loved this informative article and you would want to receive more details concerning radio-adapter - Click on Car Hifi Radio Adapter, kindly visit the webpage. If it feels like the component is bound on something, it likely is. Carefully analyze the area where it`s bound, and you`ll most likely locate a screw, bolt, or other fastener. Some radios are stored in with other techniques. OEM Ford head units are occasionally held in by internal clasps that could only be released by a unique tool. Pull the Trim Back Carefully. When you have successfully removed all of the fasteners that hold the cut or bezel set up, the trimming, or bezel should be loose. However, it may still be connected to components under the dash.
Unbolt the Car Stereo. Together with the head unit fasteners exposed, it`s time to really eliminate the vehicle radio in the dash. Within this vehicle pictured above, the stereo has been held in by four screws, so the next thing to do is to remove them, place them in a secure location, and then carefully pull on the head unit with no dashboard.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
脚注信息
天天同城网站管理系统
服务时间:周一至周日 08:30 — 20:00  
联系地址:焦作市站前路中央尚都1幢1单元20楼2001室   邮政编码:454150